The Marlon New Product development team sat down with the goal of developing a trailer that would do more, could be used for Multiple uses and could be used in Multiple seasons. Development code name was MultiFunctional Trailer.
We wanted it lite so it can be towed behind a selection of vehicles to haul your sled, ATV, Trailer SxS, stack of wood …………that’s why it is all aluminum!
The sled industry needs a wide trailer for the larger trail machines and a narrow trailer for mountain sleds. We used our experiences and knowledge from 20\ year’s in the sled deck industry and adapted the slide out sides to work on our new Multifunctional two place trailers.
Tilt trailer or drive on back off – it’s your call our trailer does both!
We also developed a drive on drive off trailer and did but then asked why? Why because the drive on drive off trailer was brought to the industry many years ago when sleds did not have reverse, It adds cost for the additional 2’ of “V nose” decking that is not used and takes up more valuable storage area. We studied users and found that most now reverse off of their trailer because there is no room to the side of their truck in parking lots, we also found they need the rear ramp to drive back on so why not just back off. Why not spend the extra time taking down and putting up the front ramps when you could be going for a beer after a great day exploring!
But we wanted more…. And we wanted to be the best and to grow the declining sled trailer business so we kept this in mind and looked for things we could do from the ground up.
Extruded sides which you may recognize from our sled decks. With tie down points down the entire side at a 45 degree angle allowing you to tie down dirt bikes, various items you may carry from the lumber yard or to the dump or your ATV or side by side using our tire tie downs.
Center extrusion allowing you to tie the center of the trailer items like dirt bikes and ATV’s, lumber and things that need to get to the cottage.
Slide out sides as mentioned earlier and aluminum decking. The pure strength of the aluminum extrusion vs. a thin sheet of plywood allows you to tie down items such as ATV’s and not worry about the tires sinking into the plywood and straps coming loose while driving in a thunderstorm – confident that there is no plywood stretching because it has become wet.
Our trailer has been designed for all seasons and to meet your needs. It can be used for your current and future toys!
Wide Rear Ramp for snowmobiles and or 50” Trail SxS’s with safety latch
SxS Ramps
Tire Tie Downs
Aluminum Tongue Box
Aluminum rims
Spare Tire and Tire Carrier
Motorcycle Wheel Chock
Superglide ski glides and ATV tire traction
Snowmobile Traction Mat
More in development as we work on watercraft, rack to carry your Marlon utility boat or a tent to mention a few.
Note: it is the responsibility of the buyer to comply with the local laws regarding trailers. For full information on the laws in your State or Province, contact the appropriate agency.
MARLON MULTI-FUNCTIONAL MULTI-SEASON 10' DOUBLE TILT TRAILER
The Marlon New Product development team sat down with the goal of developing a trailer that would do more, could be used for Multiple uses and could be used in Multiple seasons. Development code name was MultiFunctional Trailer.
We wanted it lite so it can be towed behind a selection of vehicles to haul your sled, ATV, Trailer SxS, stack of wood …………that’s why it is all aluminum!
The sled industry needs a wide trailer for the larger trail machines and a narrow trailer for mountain sleds. We used our experiences and knowledge from 20\ year’s in the sled deck industry and adapted the slide out sides to work on our new Multifunctional two place trailers.
Tilt trailer or drive on back off – it’s your call our trailer does both!
We also developed a drive on drive off trailer and did but then asked why? Why because the drive on drive off trailer was brought to the industry many years ago when sleds did not have reverse, It adds cost for the additional 2’ of “V nose” decking that is not used and takes up more valuable storage area. We studied users and found that most now reverse off of their trailer because there is no room to the side of their truck in parking lots, we also found they need the rear ramp to drive back on so why not just back off. Why not spend the extra time taking down and putting up the front ramps when you could be going for a beer after a great day exploring!
But we wanted more…. And we wanted to be the best and to grow the declining sled trailer business so we kept this in mind and looked for things we could do from the ground up.
Extruded sides which you may recognize from our sled decks. With tie down points down the entire side at a 45 degree angle allowing you to tie down dirt bikes, various items you may carry from the lumber yard or to the dump or your ATV or side by side using our tire tie downs.
Center extrusion allowing you to tie the center of the trailer items like dirt bikes and ATV’s, lumber and things that need to get to the cottage.
Slide out sides as mentioned earlier and aluminum decking. The pure strength of the aluminum extrusion vs. a thin sheet of plywood allows you to tie down items such as ATV’s and not worry about the tires sinking into the plywood and straps coming loose while driving in a thunderstorm – confident that there is no plywood stretching because it has become wet.
Our trailer has been designed for all seasons and to meet your needs. It can be used for your current and future toys!
.