Available at This Location:

Noddings’ Sales & Service Ltd.

Exmark Lazer Z S-Series LZS749AKC724A1

Specifications

Model	Lazer Z S-Series LZS749AKC724A1	Category Name	Lawn / Garden	Year	2022
Sale Type	New	Manufacturer	Exmark	Price	Contact for price CAD
Province	Nova Scotia

Description

With the top-rated Lazer Z S-Series of zero turn riders, you can choose from eight different engines, including an eco-friendly, Electronic Fuel Injection (EFI), propane option. Four UltraCut™ Series 4 cutting deck sizes are available in 52, 60 or 72 inches. Want tough? Try a 10-gauge, formed and continuously seam-welded top and a 7-gauge side skits. All with welded spindle mounting sites and full-floating 4-point suspension with four adjustable anti-scalp rollers. Select Lazer Z S-Series models offer Smart Controller. This easy-to-use interface has a wealth of user data like fuel level, interlock status, PTO and total hours, maintenance reminders and machine health status.

Mower Deck Widths: 52" , 60" and 72"

DECKS

Blades

3 Blades at 24.50" Length

Deck_Style

Floating Deck

Blade_Tip_Speed

Approximately 18,500 fpm.

Cutting_Heights

1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.

Deck_Construction

10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.

Width_/_Cutting_Deck

72"

Deck_Style_Description

Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.

FEATURES

Doing More With Propane

Our EFI system optimizes fuel delivery in real-time, which improves efficiency and performance. This, in combination with lower propane cost reduces operating expenses versus typical gas-powered mowers.

Less Time At The Pump

Gas-powered S-Series models have a single 8-gallon tank with one fill location.

Built to Last

Want tough? Try a 10-gauge, formed and continuously seam-welded top, and a 7-gauge side skirt. All with welded spindle mounting sites. And, full-floating, 4-point suspension with four adjustable anti-scalp rollers.

On-Board Diagnostics

Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.

Fewer Grease Points

With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.

Ultracut Series 4 Deck

This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.

Tool-less Belt Removal

Deck and hydro belt can be installed without using any tools.

EQUIPMENT

UPC

193308000596

Seat

Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.

Electrical

12-volt battery with 20-amp alternator.

Drive_Tires

24 x 12-12, 4 ply Turf Master®

Parking_Brake

Lever-actuated disc brake.

Tractor_Frame

Unibody, welded, heavy-duty 1.5" x 3" tubular steel.

Blade_Spindles

No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.

Steering_Control

Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.

Standard_Features

Engine hour meter and cup holder

Front_Caster_Tires

13 x 6.5-6, smooth-tread, semi-pneumatic.

DIMENSIONS

Width

84.9 in. (215.6 cm)

Height

70.5 in. (179.1 cm)

Length

86.1 in. (218.7 cm)

Curb_Weight

1250

POWER COMPONENTS

ROPS

2-post foldable ROPS standard with seat belt and latch.

Drive

Hydro-Drive

Speed

Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.

Casters

.50" thick caster yoke arms.

Deck_Lift

Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.

Fuel_Type

Gas EFI

Air_Filter

Heavy-duty canister air filtration system

Engine_Brand

Kohler

Engine_Model

ECV749

Engine_Speed

3,750 RPM

Engine_Series

Command™ EFI

Fuel_Capacity

12-gallon (45.4-L), single fuel tank with single fill location.

Carb_Compliant

Fuel_Indicator

Yes - electronic Sender

PTO_Engagement

MagStop electromagnetic 200-ft-lb clutch with spot brake

Safety_Package

Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.

Drive_Description

Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.

Drive_Wheel_Release

Allows unit movement without engine running.

Engine_Displacement

747

SOURCE DEALER INFO

City

Bridgewater

Logo

/uploadedimages/8838/logo/8838.jpg

State

Nova Scotia

Node_id

8838

Website

https://noddingssales.ca

Node_name

Noddings’ Sales & Service Ltd.

Finance_link

https://creditonline.dealertrack.ca/Web/Default.aspx?Token=4677c914-6fb8-4492-8f43-70f3cf6b0788&Lang=en