Phone(s): 1 888-706-7076

https://powersportslink.ca

3485 Rebecca St #204
Oakville  Ontario
L6L 0H4
Available at This Location:

Advantage Tractor & Implement Limited

Lane Shark LS-4

Listing image Listing image Listing image Listing image
Specifications

Model LS-4 Category Name Attachments Year 2025
Sale Type New Manufacturer LANESHARK Odometer km
Price Contact for price CAD Province Ontario
Description
  • Hydraulic implement flow rate 8.5gpm to 14.9gpm - Standard motor
  • Hydraulic implement flow rate 15gpm to 20gpm - High capacity motor (Special Order Only)
  • Hydraulic rear remotes* or third function. ONLY Pressure comes from the remote, and return must be to the sump. (CANNOT RETURN THROUGH AUXILIARY HYDRAULICS)
  • We do not recommend rear remote plumbing as some tractors may lose loader priority
  • NOT COMPATIBLE WITH DIVERTER VALVES
  • Minimum dry tractor weight of 3000 lbs
  • Minimum tractor width of 55 inches
  • Certified roll over protection system
  • For stabilization while operating the Lane Shark, fill rear tires of your tractor with water for use as a ballast, as well as additional weight on rear. ie: box blade, or rotary cutter.
  • The Lane Shark LS4 is a light duty rotary cutter designed to clear overgrown roadways, for light land management, and property maintenance.
  • Cutting width / cutting area of 44"
  • Easily cuts up to 2-3” diameter limbs, brush, saplings, and underbrush. Cutting width is 44". The LS4 has a wide range of cutting positions that allow it to cut vertically, offset, directly in front (level), or 25°, 35°, & 45° in the vertical and offset positions
  • Multi-position adjustment rail for added versatility and an extra foot of vertical extension
  • The Lane Shark LS4 attaches to the front of any FEL tractor with a SSQA or JD Hook & Pin-Style attachment system. There are adapters available to fit most other applications sold separately.
  • Rear rubber skirt and skid shoes for a smoother cutting process
  • The Lane Shark LS4 weighs just under 450 lbs.
  • When purchasing the Lane Shark brush cutter, you will receive a unit equipped with #10 ORB (O-ring Boss) inlets. When using ORB, a minimum inside diameter of 1/2” is required.
  • NOT COMPATIBLE WITH SKID STEERS
SOURCE DEALER INFO
City
Jasper
Logo
/uploadedimages/8864/logo/8864.png
State
Ontario
Node_id
8864
Website
https://advantagetractor.ca
Node_name
Advantage Tractor & Implement Limited
Finance_link
https://digital.dealertrack.ca/creditapp/standalone?token=9e0a34c8-2c83-4803-a042-2e34ff6a73c0&flow=Full&lang=en