Conquer Snow

• 998 Genesis Turbo Engine
• The boosted, one liter triple is unmatched when it comes to delivering incredible power with the refinement and quality you have come to expect from a Yamaha. Designed around a premium turbo unit, every engine component from the pressed forged crank to the cast steel exhaust manifold is dedicated to producing uncompromised performance. The proven Yamaha engine has earned the respect and reputation befitting the industries highest achiever. This engine produces the potent venom in the Sidewinders bite.
• YSRC High Performance Clutch System
• The YSRC primary and roller secondary clutches are recalibrated with a new helix for durable, cooler operation. They harness and transfer the massive torque produced by the Genesis Turbo, efficiently to the track while minimizing drive belt wear. The primary shifts out aggressively to use all the power on tap while the roller secondary is quick to back-shift and provides additional ratio through its oversize sheaves to keep accelerating long after the others have signed off.
• Dual Shock SR Rear Suspension
• The Dual Shock SR rear suspension is the cumulative result of years of punishment and development in snocross and cross-country competition. This lightweight suspension offers premium bump compliance with excellent resistance to bottoming. The Dual Shock SR is a "coupled" skid-frame that utilizes a unique "sliding" front arm mount with half an inch of movement at the front arm "slot". This active arm design delivers controlled (reduced) ski-lift during acceleration while retaining a good measure of independent front arm tracking. 2019 sees the return to a solid rear axle layout with new idler wheel design and configuration for greater durability.
• SE Shock Package
• The SE gets premium FOX Zero RC front shock absorbers with adjustable coil springs and a wide range of rebound and compression damping adjustments. These shocks include FOX® FIST ice scrapper technology, velocity sensitive damping and high quality hard chrome rods with T6 anodized 1.5 inch bodies. The skid frame front arm gets an aluminum 1.5 HPG gas shock and the rear duties are carried out by a beefier 2.0 aluminum HPG shock for fade-free performance.

• High Tech, Liquid Cooled Turbo
• The nickel alloy turbine body is extremely strong and precise, able to withstand highly elevated temperatures. Engine coolant is circulated through the turbocharger to control both underhood temperature and help cool the intake charge. Upon engine shut down, the convection energy produced by super-heated coolant at the turbo head keeps it circulating without the coolant pump in operation. This eliminates the need for an engine cool down cycle while maintaining high durability in the turbo component.
• Mitsubishi Electronic Control Unit
• The Yamaha-developed Mitsubishi ECU uses a series of 9 sensors to gather running condition data which it computes using a predetermined memory 'map'. It then adjusts ignition timing, fuel delivery, manifold air-pressure and turbo boost pressure to produce maximum Prformance under any condition - reliably.
• Triple Throttle Body Induction
• Yamaha wanted an engine that's exceptionally quick to respond with little or no 'lag' as found in a conventional turbo. One of the ways they achieved their goal was to develop an intake system using three separate throttle bodies positioned very close to the intake valves. Instead of just one feeding long intake tubes — something that is not seen in any other production turbo on the planet. And another first for Yamaha with the Genesis turbo.
• Electronic Air Bypass Valve (ABV)
• Unlike conventional turbo 'blow-off' valves, the Yamaha ABV redirects air pressure back into the intake side of the compressor to prevent surge and help maintain impeller speed, always at the ready for the next acceleration with seamless power delivery.

• Centralized Mass Design
• The SRV chassis layout was engineered with the goal of centralizing mass. Approximately 60 percent of the sled's weight is tightly centered within the main triangulation. The result is a quick-handling, well balanced sled, that's fun to throw around in a wide variety of conditions.
• SRV Front Suspension
• The SRV front suspension geometry is aimed at managing spindle camber, resulting in minimized bump-steer and maximized cornering bite giving rider confidence in varying trail conditions. The A-arms are mounted at a 30-degree angle from the sled's centerline to efficiently dissipate impact force throughout the entire chassis. Likewise, the front shocks mount directly to the leading spar so that trail forces are routed to the strongest part of the chassis. Wide a-arm spacing minimizes flex and stress in the front suspension system, which means consistent and confident corner Handling.
• Lightweight, Rigid SRV Chassis
• The SRV chassis combines a load-bearing triangulated structure with lightweight aluminum construction to create a neutrally balanced sled that's centered on the rider. The pyramidal upper frame creates chassis strength without excessive weight.
• Tuner III Skis
• The Yamaha Tuner Ski is lightweight and designed for precise Handling response. A wide selection of carbides can be combined to dial the Tuner to fit any riding style. Replaceable ski tips are available in multiple colors for additional customization.