The Sidewinder X-TX SE is all about getting off-trail with its new quick transfer, VersAttak 146 rear suspension and 2.00" deep-lug Camso track. The front end sports a narrower 40" ski stance held up by wide Yamaha Mountain skis. The tunnel and steering system is based on the SR-M Mountain chassis complemented with a light weight mountain seat, tapered foot boards and new Stealth brake system. Top-shelf Fox® Zero QS3 shocks are found up front and on the new rear skid to accommodate a wide range of terrain and riding styles. The Genesis Turbo adds a power packed punch of fun to any outing.
Fox® 1.5 Zero QS3 Front Shocks
The Sidewinder X-TX SE front suspension is equipped with Fox® QS3 shocks for a premium upgrade to this model. The Fox® high-pressure gas, coil spring shock features a piggyback chamber to deliver reduced fading, exceptional control, and three easy to adjust compression damping performance settings so you can quickly and easily adjust the ride to conditions and riding preference.
Versattak 146 Rear Suspension
The NEW Dual Shock 146 rear suspension is designed around a light mountain, tapered tunnel. It also features a mountain style front arm with new 146" rails and utilizes a longer rear QS3 shock length with a lightweight single pull rod. A newly designed shock pivot is added to the uncoupled front arm to provide smooth transfer for great handling both in and out of the powder.
NEW 146 X 2.00" Track
The 2.25" lugged track was born in the Rockies and offers up the best traction for off trail play wherever that takes you. The longer 146" length offers plenty of float and lift to keep you going, but its not so long that you have to struggle to maneuver in tight, challenging terrain.
What's New for 2020
NEW VersAttak 146" Rear Suspension
NEW RR Style Running Board Edges
NEW Ice Scratchers
NEW 2.00" Camso Track
REVISED Chassis to support 146" design
NEW 40" Suspension with Moutain Spindgles
Top Features
High Tech Turbo
The Nickel alloy turbine body is extremely strong and precise, able to withstand highly elevated temperatures. Supported by premium, ceramic ball bearings, the Inconel turbine blade assembly is very light and strong. This yields a low moment of inertia for lightning quick response to exhaust gas input. Triple throttle bodies are used exclusively to further enhance the quick delivery of compressed air from the impeller to intake valves.
Fox® 1.5 Zero QS3 Front Shocks
The Sidewinder X-TX SE front suspension is equipped with Fox® QS3 shocks for a premium upgrade to this model. The Fox® high-pressure gas, coil spring shock features a piggyback chamber to deliver reduced fading, exceptional control, and three easy to adjust compression damping performance settings so you can quickly and easily adjust the ride to conditions and riding preference.
Versattak 146 Rear Suspension
The NEW Dual Shock 146 rear suspension is designed around a light mountain, tapered tunnel. It also features a mountain style front arm with new 146" rails and utilizes a longer rear QS3 shock length with a lightweight single pull rod. A newly designed shock pivot is added to the uncoupled front arm to provide smooth transfer for great handling both in and out of the powder.
146 X 2.0" Camso® Track
The 2.0" lugged Camso® track was born in the Rockies and offers up the best traction for off trail play wherever that takes you. The longer 146" length offers plenty of float and lift to keep you going, but its not so long that you have to struggle to maneuver in tight, challenging terrain.
Performance
Triple Throttle Body Induction
Yamaha wanted an engine that's exceptionally quick to respond with little or no 'lag' as found in a conventional turbo. One of the ways they achieved their goal was to develop an intake system using three separate throttle bodies positioned very close to the intake valves. Instead of just one feeding long intake tubes — something that is not seen in any other production turbo on the planet. And another first for Yamaha with the Genesis turbo.
EBRS Engine Braking Control
The effect of 4-stroke 'engine braking' when the throttle valves are closed has a significant impact on handling and ride character. Yamaha developed a special system which employs the ISC (idle speed control) circuit and ECU map using throttle valve movement and RPM information to reduce negative intake pressure during deceleration.
Mitsubishi Electronic Control Unit
The Yamaha-developed Mitsubishi ECU uses a series of 9 sensors to gather running condition data which it computes using a predetermined memory 'map'. It then adjusts ignition timing, fuel delivery, manifold air-pressure and turbo boost pressure to produce maximum performance under any condition - reliably.
Electronic Air Bypass Valve (ABV)
Unlike conventional turbo 'blow-off' valves, the Yamaha ABV redirects air pressure back into the intake side of the compressor to prevent surge and help maintain impeller speed, always at the ready for the next acceleration with seamless power delivery.
Handling
YSRC High Performance Clutch System
The YSRC primary and roller secondary clutches are calibrated for durable, cool operation. They harness and transfer the massive torque produced by the Genesis Turbo efficiently to the track while minimizing drive belt wear. The primary shifts out aggressively to use all the power on tap while the roller secondary is quick to back-shift and provides additional ratio through its oversize sheaves. The result is continuous acceleration after others have signed off.
Yamaha Mountain Ski
The lightweight Yamaha Mountain ski delivers everything you want in a deep snow ski. Its wide footprint enhances flotation and actively lifts the sled's nose up on plane in deep powder. Traction lugs on the top of the ski give you a sure foothold when the situation gets really gnarly. The wide and deep keel design deliver light steering effort yet confident and predictable handling on hard pack and in fresh fluff.
40" Ski Stance
The 40" ski stance hits the sweet spot between on trail stability with cornering prowess and off-trail maneuverability for deep snow carving with quick transitions from side to side. New, wide cross-over skis feature a single keel design, to compliment the narrower stance.
Mountain Steering System
A dedicated, tall steering post delivers optimum ergonomics for standup riding. The 5.5 inch riser, with broad, molded, curved-end mountain bar and incorporated mountain strap delivers ample leverage for off-trail riding. The system is adjustable to dial in sweep and reach to help keep you in the sweet spot.
COMFORT
Stealth control system
The handle bar controls feature a left hand switch cluster which allows for 'on the fly' access to the multi-step hand and thumb warmer adjusters. Information available on the multi-function gauge can be easily selected with a convenient toggle switch and the push button reverse gear switch is also located in the left hand cluster. The right side of the bar is clean with an ergonomically shaped throttle lever and simple, stand-alone emergency stop switch. An updated Hayes Stealth brake cylinder equipped with a new composite Stealth brake lever provides great modulation for better feel and powerful stopping performance.
Mountain Seat
Lightweight, with a tall and narrow profile, the X-TX mountain seat is both shorter and more tapered towards the front than our standard trail seat. This allows for easier rider transitions from side-to-side, and improved stand-up ergonomics.
Push Button Electric Start
As with all Yamaha 4-stroke powered snowmobiles, there is no need to pull on a string to bring the engine to life. Easy electric starting is achieved through a simple handlebar mounted, glove friendly, push-button switch.
Push Button Reverse
Convenient handlebar positioning makes shifting to and from reverse easy with just the push of your thumb. A servo motor shifts the drive train into reverse simply and consistently. An audible warning beeper reminds you when you are still in reverse.
Sidewinder X-TX SE has a 270 tune with performance exhaust. Machine has 8815 kms
The Sidewinder X-TX SE is all about getting off-trail with its new quick transfer, VersAttak 146 rear suspension and 2.00" deep-lug Camso track. The front end sports a narrower 40" ski stance held up by wide Yamaha Mountain skis. The tunnel and steering system is based on the SR-M Mountain chassis complemented with a light weight mountain seat, tapered foot boards and new Stealth brake system. Top-shelf Fox® Zero QS3 shocks are found up front and on the new rear skid to accommodate a wide range of terrain and riding styles. The Genesis Turbo adds a power packed punch of fun to any outing.
The Sidewinder X-TX SE front suspension is equipped with Fox® QS3 shocks for a premium upgrade to this model. The Fox® high-pressure gas, coil spring shock features a piggyback chamber to deliver reduced fading, exceptional control, and three easy to adjust compression damping performance settings so you can quickly and easily adjust the ride to conditions and riding preference.
Versattak 146 Rear Suspension
The NEW Dual Shock 146 rear suspension is designed around a light mountain, tapered tunnel. It also features a mountain style front arm with new 146" rails and utilizes a longer rear QS3 shock length with a lightweight single pull rod. A newly designed shock pivot is added to the uncoupled front arm to provide smooth transfer for great handling both in and out of the powder.
NEW 146 X 2.00" Track
The 2.25" lugged track was born in the Rockies and offers up the best traction for off trail play wherever that takes you. The longer 146" length offers plenty of float and lift to keep you going, but its not so long that you have to struggle to maneuver in tight, challenging terrain.
Sidewinder X-TX SE has a 270 tune with performance exhaust. Machine has 8815 kms