Machine finished forged aluminium Marchesini wheels, reducing weight to 452 lb. Marzocchi forks with diamond-like coating (DLC). Brake disc carriers in milled aluminium. Carbon fibre fairing and black accessories. All these make the Diavel Carbon a magical meeting point of style and performance.
The Diavels heart is the Ducati Testastretta 11 - developed directly from the incredibly powerful, world-beating race engines of Ducati Corse. Ducatis Testastretta 11 harnesses the immense power of the Superbike engine and makes it smooth and adaptable, a massive step forward in balancing high-performance with an enjoyable ride. For an engine with brute power on tap when needed and smooth, user-friendliness available for an effortless and comfortable ride, Ducati revised the configuration of the cam timing with particular focus on the valve overlap angle. The overlap angle is defined as the interval of crankshaft rotation, measured in degrees, during which both the intake and exhaust valves are open at the same time. This overlap occurs between the end of the exhaust stroke and the start of the intake stroke. High performance engines, which are subject to compromising smoothness for extreme power delivery, use high values of this parameter in order to benefit from the pressure waves to improve engine performance by maximising volumetric efficiency. On the Testastretta 11 engine, this angle has been reduced from 41, used in the Testastretta Evoluzione engine which powers the 1198, to 11. As a result, the fresh inlet charge flow is less compromised by the exiting exhaust gases, resulting in a much smoother combustion in addition to improved fuel economy and lower exhaust emissions.
The Diavel uses 50mm Marzocchi front forks with fork sliders black-finished in super low-friction diamond-like carbon (DLC). These forks are fully adjustable for spring pre-load, compression and rebound damping. The forks are gripped by a slash-cut triple-clamp - cast aluminium for the lower and forged for the upper - with a rubber-mounted riser to tapered alloy bars. With a rake of 28, trail of 130mm (5.12in) and an offset of 24mm (0.945in), the set-up provides a sure-footed and agile front-end for incredible handling and 70 of total steering lock for maximum manoeuvrability.
The racing-derived Ducati Traction Control (DTC) is a highly intelligent system which acts as a filter between the riders right hand and the rear tyre. Within milliseconds, DTC is able to detect and control rear wheel-spin, considerably increasing the bikes active safety and performance. The system offers eight levels of sensitivity, each programmed with an amount of rear wheel-spin tolerance. These levels are in line with progressive levels of riding skills classified from one to eight. Level one is programmed to offer the least amount of interaction for sport-oriented riders, while level eight uses the most amount of interaction for complete confidence.
*Bi-weekly quote includes HST. 48 Months. $0 Down Payment. OAC. Conditions apply - extended warranty coverage is limited and optional talk to our finance office for all the details.
Click "Get Financing" to see if you qualify!
Apex Cycle 1-888-702-4150 Visit our showroom for a huge selection of the brands you love, conveniently located off the 401 in Cambridge.
Price includes all fees - tax and license extra. Price includes all fees. Please contact us to make an appointment so we can ensure the vehicle is onsite for viewing.
Don't let the fact that this Diavel Carbon is dressed up like a Strada fool you into thinking that it has been all over the map. At less than 5000 kms on the dial, those accessory sidecases and tinted windscreen have been used strictly for convenience. It will be up to its next owner to see how they handle the long haul!Standard Features May Include:
Machine finished forged aluminium Marchesini wheels, reducing weight to 452 lb. Marzocchi forks with diamond-like coating (DLC). Brake disc carriers in milled aluminium. Carbon fibre fairing and black accessories. All these make the Diavel Carbon a magical meeting point of style and performance.
The Diavels heart is the Ducati Testastretta 11° - developed directly from the incredibly powerful, world-beating race engines of Ducati Corse. Ducati’s Testastretta 11° harnesses the immense power of the Superbike engine and makes it smooth and adaptable, a massive step forward in balancing high-performance with an enjoyable ride. For an engine with brute power on tap when needed and smooth, user-friendliness available for an effortless and comfortable ride, Ducati revised the configuration of the cam timing with particular focus on the valve overlap angle. The overlap angle is defined as the interval of crankshaft rotation, measured in degrees, during which both the intake and exhaust valves are open at the same time. This overlap occurs between the end of the exhaust stroke and the start of the intake stroke. High performance engines, which are subject to compromising smoothness for extreme power delivery, use high values of this parameter in order to benefit from the pressure waves to improve engine performance by maximising volumetric efficiency. On the Testastretta 11° engine, this angle has been reduced from 41°, used in the Testastretta Evoluzione engine which powers the 1198, to 11°. As a result, the fresh inlet charge flow is less compromised by the exiting exhaust gases, resulting in a much smoother combustion in addition to improved fuel economy and lower exhaust emissions.
The Diavel uses 50mm Marzocchi front forks with fork sliders black-finished in super low-friction diamond-like carbon (DLC). These forks are fully adjustable for spring pre-load, compression and rebound damping. The forks are gripped by a slash-cut triple-clamp - cast aluminium for the lower and forged for the upper - with a rubber-mounted riser to tapered alloy bars. With a rake of 28°, trail of 130mm (5.12in) and an offset of 24mm (0.945in), the set-up provides a sure-footed and agile front-end for incredible handling and 70° of total steering lock for maximum manoeuvrability.
The racing-derived Ducati Traction Control (DTC) is a highly intelligent system which acts as a filter between the rider’s right hand and the rear tyre. Within milliseconds, DTC is able to detect and control rear wheel-spin, considerably increasing the bike’s active safety and performance. The system offers eight levels of “sensitivity”, each programmed with an amount of rear wheel-spin tolerance. These levels are in line with progressive levels of riding skills classified from one to eight. Level one is programmed to offer the least amount of interaction for sport-oriented riders, while level eight uses the most amount of interaction for complete confidence.
*Bi-weekly quote includes HST. 48 Months. $0 Down Payment. OAC. Conditions apply - extended warranty coverage is limited and optional talk to our finance office for all the details.